NDE आवश्यकताएँ Lookup
निर्धारित करें कि AWS D1.1:2025 खंड 8 के अनुसार आपके वेल्ड जोड़ के लिए कौन सी अविनाशी परीक्षण विधियाँ आवश्यक हैं। लागू अविनाशी परीक्षण विधियों, स्वीकृति मानदंड खंडों और UT संकेत वर्गों को देखने के लिए अपनी जोड़ कॉन्फ़िगरेशन और लोडिंग स्थिति का चयन करें।
Use this NDE lookup to organize निरीक्षण-method decisions before reading the detailed स्वीकृति criteria. It helps separate दृश्य निरीक्षण, surface methods, volumetric methods, and contract-specified परीक्षण so a reviewer can move from joint context to the most relevant inspection reference.
Built on AWS D1.1:2025 Clause 8 — inspection requirements traced to the तालिका.
Table 8.2 / 8.3 — UT Indication Classes
अपने वेल्ड के लिए UT स्वीकृति-अस्वीकृति संकेत रेटिंग देखें। वर्ग A = अस्वीकृत। वर्ग D = स्वीकृत। वर्ग B और C तालिका के नीचे दिए गए नोट्स के अनुसार विच्छिन्नता की लंबाई पर निर्भर करते हैं।
AWS D1.1:2025 Clause 8.9 के अनुसार: “सभी वेल्ड का दृश्य निरीक्षण किया जाएगा। सभी स्टील्स में वेल्ड का दृश्य निरीक्षण पूर्ण वेल्ड के परिवेश तापमान तक ठंडा होने के तुरंत बाद शुरू हो सकता है।”
D1.1 निरीक्षण कैसे निर्दिष्ट करता है
AWS D1.1:2025 Clause 8 निरीक्षण को सात भागों में व्यवस्थित करता है। भाग A (सामान्य आवश्यकताएँ) निरीक्षक योग्यता और जिम्मेदारियों को स्थापित करता है। भाग B ठेकेदार दायित्वों को कवर करता है। भाग C दृश्य निरीक्षण (तालिका 8.1), UT (तालिका 8.2 और 8.3), और RT (Clause 8.12) के लिए स्वीकृति मानदंड को परिभाषित करता है। भाग D से G अविनाशी परीक्षण प्रक्रियाओं, RT, UT, और अन्य विधियों (MT/PT) को कवर करते हैं।
Clause 8.9 के अनुसार सभी वेल्ड पर आवश्यक है। तालिका 8.1 में स्वीकृति मानदंड दरारें, संलयन, क्रेटर क्रॉस-सेक्शन, वेल्ड प्रोफाइल, अंडरसाइज़, अंडरकट और सरंध्रता को कवर करते हैं। स्थैतिक और चक्रीय रूप से लोड हो गए कनेक्शनों के लिए अलग-अलग मानदंड होते हैं।
Clause 8.12 के अनुसार एक्स-रे या गामा किरणों का उपयोग करता है। स्थायी फिल्म रिकॉर्ड बनाता है। RT स्वीकृति मानदंड स्थैतिक (8.12.1) और चक्रीय (8.12.2) लोडिंग के लिए भिन्न होते हैं। तालिका 8.4 और 8.5 में IQI आवश्यकताएँ।
Clause 8.13 के अनुसार ध्वनि तरंग परीक्षण। तालिका 8.2 (स्थैतिक + चक्रीय संपीड़न) और तालिका 8.3 (चक्रीय तनाव) में स्वीकृति मानदंड। वेल्ड आकार और खोज कोण के अनुसार संकेत रेटिंग के साथ चार गंभीरता वर्ग (A-D)।
Clause 8.10 के अनुसार चुंबकीय कण (MT) और प्रवेशक (PT) परीक्षण। सतह और सतह के पास के दोषों का पता लगाता है। MT केवल लौह-चुंबकीय सामग्री के लिए है। दोनों तालिका 8.1 स्वीकृति मानदंड का उपयोग करते हैं। वेल्ड संदर्भ के लिए समर्पित MT देखें।
अपनी अनुपालन जाँच जारी रखें
अविनाशी परीक्षण आवश्यकताएँ अक्सर पूछे जाने वाले प्रश्न
D1.1:2025 requires visual inspection (VT) on all welds per Clause 8.9. Additional NDT methods — RT, UT, MT, and PT — are specified in the contract documents by the Engineer per Clause 8.1.1. The Engineer designates the categories of welds to be examined, the extent of examination, and the method or methods of testing.
Radiographic testing (RT) uses X-rays or gamma rays to create a permanent film record of internal discontinuities. Ultrasonic testing (UT) uses high-frequency sound waves to detect internal flaws. RT provides a permanent record but has thickness limitations. UT is faster, portable, and works on thicker materials. D1.1 provides acceptance criteria for RT in Clause 8.12 and for UT in Clause 8.13 with Tables 8.2 and 8.3.
Magnetic particle testing (MT) and penetrant testing (PT) detect surface and near-surface discontinuities per D1.1 Clause 8.10. MT works only on ferromagnetic materials. PT works on any material. Both use the acceptance criteria in Table 8.1. The Engineer specifies when MT or PT is required in the contract documents per Clause 8.1.1.
Table 8.2?Table 8.2 provides UT acceptance-rejection criteria for statically loaded nontubular connections and cyclically loaded connections in compression. It uses four discontinuity severity classes (A through D) with indication ratings that vary by weld size, search unit angle (70, 60, or 45 degrees), and material thickness. Class A indications are rejected regardless of length. Class D indications are accepted regardless of length or location.
AWS D1.1/D1.1M:2025 (वर्तमान संस्करण)